Monday, 25 March 2013

How To Use Thin Coat Angle Beads?

Perfect living and work environment is essential for our productivity. There are several factors that may affect our psychological equilibrium in our home and office. For example, you may have noticed some issues in your walls and ceiling, which requires some plaster works. If it is a minor issue, you may have possibly ignored it in the early stage. However, do not worry about the money to repair when you can do this job using some simple articles including thin coat angle beads. This article throws light into the effective application of thin coat angle beads.

How to use thin coat angle beads in plaster works?

Beads are an inevitable fragment of plasterwork. The use of bead like articles was popular in Egypt and Asian countries. As building and construction sector advanced, several variants of beads evolved to enhance perfection to the man-made structures. The coat angle bead is one of the popular bead articles that have multipurpose use. The main function of the coat angle bead is to deliver perfection to the corners. However, it is important to check the many factors while implementing coat angle beads as even a slight error can cause significant irregularity in finishing. The two main factors include,

•    Selection of coat angle beads
•    Analyzing the quality

Selection of coat angle beads

Coat angle beads are mainly used for skim purposes and experts recommends lightweight but strong structure. Use alloy coat angle beads, as it is highly durable and reliable.

Why it is important to use alloy coat angle beads?

Alloy coat angle beads are lightweight and possess high durability. They could withstand installation pressure while maintaining its normal structure. It is estimated that one in every twenty coat angle bead becomes useless during the plastering work due to the less quality metal used in thin coat angle beads.

Analyzing the quality

How can we analyze the quality of a thin coat angle bead?

•    The protractor method
•    Eraser method

The protractor method

Even a minute bend or difference in straight structure of the thin coat angle bead can alter the plaster finishing. The protractor test method helps us analyze the thin coat angle bead for any possible deviation. In this method, a protractor is placed at the bead, in a way that the middle line stays intact with the edge of the thin coat angle bead. Check the protractor line and identify the edge of the thin coat bead deviates. If you find even a slight deviation, discard the bead as it may alter the finishing of the construction.

Eraser method

Eraser method is to analyze the thickness of the thin coat bead. For this test, you require synthetic rubber eraser. In this method, you have to press the edge of the bead to the eraser. Apply only a gentle pressure so that it could deliver a mark in the eraser without damaging it. Place the second edge in the mark and analyze if the thickness is uniformly distributed.

Resilient Bars: Effective Way Of Acoustic Insulation

When you are having a peaceful sleep or trying to concentrate on your work or doing anything that requires full concentration, ambient noise can be very irritating then. In typical offices, the booths are separated by simple wall made of boards, so there is no resistance of noise. To keep the noise in one place is a challenge so you have to rely on the resilient bars. If you want, then you can keep the decibel level of the sound low, but still, this is not a permanent solution. A resilient bar is the only and the best way of restricting the sound out of the certain room. These bars will prevent sound to pass from one room to another, or from one floor to another. These are used most often in Hotels and Radio Stations, however, people have started using them more often for home and office.

There are technically two kinds of sounds.
  1.  Impact Sound
  2.  Airborne Sound
One is the impact sound than can be felt and heard too. For example we can hear the sound of the blender machine in the kitchen, or the woodcutter chain sawing the trees in the neighborhood, or the dogs barking. Another type of sound is the airborne sound. This can be heard, for example like the TV is being played, or someone is playing on the guitar.

The passage sound that makes its way through walls and doors are known as flanking transmission. The main objective is to identify this path and block them. This Flanking Transmission can be an inevitable problem for newly built houses, because it may not be possible to completely alter the structure of the houses, the best idea is to track the sound path before it’s too late.

While you are architecting a building, you have to keep sound control as one of the important aspect of making that building. It is also a very important aspect that should not be ignored. There are government legislations that will limit the sound level to a certain level. If you are refurnishing or refurbishing your old house or office, you must consider using resilient glass.

Resilient glasses are your insulators, just as you use insulators for preventing heat into your room, similarly, you should use resilient glasses for acoustic insulation. These sound proof glasses will not only give you privacy, but will prevent you from unwanted noises and make your life easier to deal with.

You can use the resilient glasses to acoustically insulate your floor. So if you work out, or play your home theater even at full volume, you will not be having any trouble of receiving complaints from your neighbor either upstairs or downstairs since you have resilient glasses. You have to use different types of resilient glasses, based on the nature of how you use the room. So you can receive a life full of privacy by using resilient glasses in both your ceiling and your walls.